Stihl FS 361 C-E Heavy Duty Brushcutter
The NEW Stihl FS361 C-EM Strimmer is a professional-grade grass trimmer designed to tackle demanding tasks with ease. Renowned for its power, durability, and precision, this tool is a staple for landscapers, groundskeepers, and homeowners with expansive outdoor areas.
Equipped with a high-performance 37.7cc two-stroke engine, the FS361 delivers ample power to effortlessly cut through thick grass, weeds, and brush. Its ergonomic design ensures comfortable operation even during extended use, reducing operator fatigue and improving efficiency.
Featuring Stihl's innovative Easy2Start system, starting the FS361 is quick and hassle-free, requiring minimal effort from the user. The tool also boasts a simplified starting procedure, making it accessible to users of all experience levels.
Standard:
STIHL 2-MIX-Engine
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
STIHL 4-point Anti-vibration System
In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide.
Multi-function Control Handle
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Bike Handle
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
Tool Free Handle Adjustment
The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.
Simplified Starting System
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Manual Fuel Pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Compensator
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Winter Setting Slide Control
It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing.
Locking Plug-in Bolt
Changing the tool is made particularly easy by locking the plug-in bolt in place.
Large Fuel Tank
The transparent fuel tank ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening.
Air Filter with Long Service Life
The easily accessible paper filter with a long service life means it can go for long intervals without changing.
Displacement cu-in 2.3 Displacement cm³ 37.7 Power output kW 1.7 Performance Um 2.3 Power output PS 2.3 Weight Pounds 1) 18.7 Weight kg 1) 8.5 Sound pressure level with plastic tool dB(A) 2) 99 Sound pressure level with metal tool dB(A) 2) 98 Sound power level with metal tool dB(A) 2) 110 Sound power level dB(A) 2) 112 Vibration level, left with plastic tool m/s² 3) 2.5 Vibration level, left with metal tool m/s² 3) 2.2 Vibration level, right with metal tool m/s² 3) 1.8 Vibration level, right with plastic tool m/s² 3) 2 Total length cm 4) 179 Cutting tool Brush knife 300-3 Cutting diameter mm 480 Fuel tank capacity oz 25.4 Tank volume l 0.75 Speed at maximum power Um 8500 - Weight excluding fuel, cutting tool and guard
- K-factor according to DIR 2006/42/EC = 2.5 dB (A)
- K-factor according to DIR 2006/42/EC = 2m / s ²
- Without cutting tool
